I'm configuring a new wireless network using as a controller and I access point. Created by Wes Schochet on AM. Looking to implement the same functionality on the Is this ju Created by Melotto on AM.
Hello,We have a few Aironet on our company and 2 networks configured, internal and guests. Happens that we want to move some internal users to the guest network and, beside asking politely through email, some of them have not switched to guests. I cann Dear Fellows, I need help on the following scenarios. Buffering while using airplay apple. Created by Ralo on AM. AP is being used as a flexconnect.
Ask a Question. You can work with the access point from the other image in the flash. For image name , specify the Cisco IOS filename that you plan to use to upgrade the access point. As mentioned earlier, do not change the name of the Cisco IOS file. Leave it as the default. You find these logs during the successful file transfer:. If there is not enough space to install the new image and keep the current running image, the download process stops, and an error message is displayed.
On the TFTP server, check to see if you receive logs about this file transfer. Once the new image is downloaded, the access point automatically reloads. At this time, the connection to the access point is lost. Login to the AP again. If you use the CLI, you can check this with the show version command. In those cases, the best option is to use the TFTP method which is telnet. Before you begin downloading or uploading a configuration file by using TFTP, perform these tasks:.
To restart the daemon, either stop the inetd process and restart it, or enter a fastboot command on the SunOS 4. For more information on the TFTP daemon, refer to the documentation for your workstation.
To configure the access point by using a configuration file downloaded from a TFTP server, follow these steps:. Step 3 Log into the access point through a Telnet session. The configuration file downloads, and the commands are executed as the file is parsed line-by-line. This example shows how to configure the software from the file tokyo-confg at IP address To upload a configuration file from an access point to a TFTP server for storage, follow these steps:. Step 2 Log into the access point through a Telnet session.
I wan to update the software for this AP to software version 8. After that, i reboot the AP and few minutes later, after the AP succesfully boot up, i check the software version still hold the old software version, 8. I have tried 3 times, but still unsuccesfully update the software version. Is anyone can help me on this? Buy or Renew. Find A Community. Cisco Community. Thank you for your support! We're happy to announce that we met our goal for the Community Helping Community campaign!
Turn on suggestions.
0コメント